A Place For Gamers By Gamers


You are not connected. Please login or register

View previous topic View next topic Go down  Message [Page 1 of 1]

#1
 JosephModz

avatar
Elite
Elite
There is now an easier way to permanently change your IDPS and PSID

I recently found a PKG that's gives a easier way to permanently change the IDPS and PSID without the need of Cygwin or copies of your Nor/Nand flash

To be able to complete this is you need the following tools:

• Jailbroken ps3
• USB drive (pen drive)
• EI0 root key dumper signed for 4.50 [You must be registered and logged in to see this link.]
• EI0 root key dumper signed for 3.55 [You must be registered and logged in to see this link.]
• MultiMan
• Hex editor
• New valid IDPS
• IDPSET PKG 0.6 [You must be registered and logged in to see this link.]

OPTIONAL

Load MultiMan and open system information at the bottom you will see your current IDPS take a note if you want just so you can compare afterwards to see if it has changed

MUST

1. firstly you need to dump your EEID root key find above the link for a signed 4.50 PKG, no longer need to downgrade to dump root key, if you’re on 3.55 you will also find the link above.

Simply install the appropriate PKG for your (CEX) CFW and run it, your ps3 will beep 3 times and restart. DONT PANIC ITS NORMAL!!


Your root key has been successfully dumped
Know you need to find your dumped key
And copy to your USB 

Load Up MultiMan and load the file manager
Go to the following directory depending on the firmware you’re using 

Dev_hdd0/tmp/ for 3.55
[You must be registered and logged in to see this link.]

Dev_hdd0/game/FLTZ00010/USRDIR for 4.50
[You must be registered and logged in to see this link.]

Copy the root key to the root of the USB drive
[You must be registered and logged in to see this link.]

2 install the IDPSET PKG and run the PKG 

3 once open you will be presented with a few options
[You must be registered and logged in to see this link.]

Firstly you will see your current IDPS

Underneath you will see:

• Save IDPS
• Load IDPS
• Edit IDPS
• Generate a DEX and a CEX dump of the current NOR/Nand
• Go To PSID
• EXIT

Know you have two options on how to change the IDPS

SECOND OPTION is ALOT Easier!

FIRST OPTION

Highlight Load IDPS

This has a sub menu highlight load IDPS and press right on the Dpad

You will see
Load IDPS
from file
From EID0
From EID5

What you want to select here is from file, 
this is where you require a new valid IDPS

On your desktop you need to create a bin file

Easiest way to do this
Select the save IDPS option above and enter its sub menu by pressing right on the Dpad

Then select:
To file this will save it to your USB drive (pen drive)

Insert USB into your computer and drag to desktop

With hex editor installed you can simply double click the IDPS.BIN file and it will open

Change this file to the new valid IDPS and save

Reinsert the USB to your ps3 and highlight Load IDPS enter submenu using right on the Dpad

And select from file

If you have done it correctly you will see the IDPS at the top change to the new VAILD IDPS


Now to flash to the ps3 memory


You require your EEID root key on the root of your USB

And the edited IDPS FILE from earlier

Once you have these on you USB

Simply highlight Save IDPS and open the sub menu

This time you want to click: to EID0 and EID5

You will see that wait appears in green in the top left

Wait to this disappear take only a few seconds

And you’re done

Restart ps3

Load MultiMan and open system information

If you look at the bottom you should see your newly valid IDPS flashed

OPTION 2

Open up IDPSET on ps3

Press x to select edit

This will allow you to edit the IDPS you see when you open the PKG


Edit the IDPS TO THE NEW VAILD IDPS

Once you’re happy

Simply highlight Save IDPS and open the sub menu

This time you want to click: to EID0 and EID5

You will see that wait appears in green in the top left

Wait to this disappear take only a few seconds

And you’re done

Restart ps3

Load MultiMan and open system information

If you look at the bottom you should see your newly valid IDPS flashed


How To Change and Flash a NEW PSID


TOOLS REQUIRED

• JAILBROKEN PS3
• EID ROOT KEY ON ROOT OF USB
• NEW PSID
• HEX EDITOR

MAKE SURE YOUR EID ROOT KEY IS ON THE ROOT OF YOUR USB AND COONECTED TO YOU PS3 OTHERWISE IT WON’T FLASH

Open up the IDPSET program

Towards the bottom you will see

GO TO PSID TOOL

Highlight it and press X

This will open a new screen

You will see your current PSID

And the following options

SAVE PSID- TO FILE
TO EID

LOAD PSIS-FROM FILE

GO TO PSID
EXIT


Firstly you need to create a PSID.bin on your desktop

Easiest way is to choose: 

Save PSID to file option

This will save your current PSID to your USB

Unplug your USB and connect to your desktop

Open up your USB and find the PSID.bin file you just saved

Drag to desktop

With hex editor installed simply double click to open the file

In the file edit the text with your new PSID once happy save it and close it

Drag file back to USB

Reconnect your USB to PS3

This time you want to select

LOAD PSID-FROM FILE

If done correctly you will see the onscreen PSID change to the one you created in the PSID.bin file

TO FLASH TO PS3 MEMORY

MAKE SURE YOUR EID ROOT KEY IS ON THE ROOT OF YOUR USB AND COONECTED TO YOU PS3 OTHERWISE IT WON’T FLASH

Select 

SAVE PSID to EID

You may see a green wait sign in the top left 

Wait until it disappears or says done

Congratulations

If you have followed this correctly you will have successfully and

Permanently Changed your IDPS and PSID


Now you have it all set up

If you require changing it again it will take only a few seconds




SOURCES

3.55 ROOT KEY DUMPER PKG

[You must be registered and logged in to see this link.]

4.50 ROOT KEY DUMPER PKG




IDPS SET

[url=http://www.ps3news.com/ps3-hacks-jailbreak/ps3-idps-changer-v1-1-homebrew-application-is-now-available/]PS3 IDPS Changer v1.1 Homebrew Application is Now Available - Page 1 - PS3 NEWS - PlayStation 3 News - PS3 Hacks - PS3 CFW 



ALL DOWNLOAD LINKS ARE TAKEN FROM THE ORIGINAL SOURCES



HOPE THIS HELPS!

View user profile

View previous topic View next topic Back to top  Message [Page 1 of 1]


Permissions in this forum:
You cannot reply to topics in this forum

Share URL

URL Direct
BBcode
HTML